Skip to main content

My old home network existed of network devices screwed to a piece of plywood and a wall-mounted patch panel. It didn’t look nice, but when we bought this house a couple of years ago I just couldn’t find a good space for a mini server rack for my Unifi gear. (And I had to do other jobs in the house first).

For a long time now I wanted to upgrade my home network with the UDM Pro and also replace the two 8-port Unifi switches with one 16 port switch. But both required a rack. And you don’t screw a UDM Pro against a piece of wood…

If you want to know more about the Unifi Dream Machine Pro, then make sure you read my review!

So the time came to find a place for a small network rack, and after some planning and measuring I was able to re-arranging the under stairs closet and to fit in (build-in actually) a 7U mini server rack.

Also, I really like the look of the Unifi hardware, with the aluminum cases, but as you probably know, there is no patch panel or blind panel on the market in the same color. Ubiquiti has announced their own patch panel and even an Unifi mini rack, but it’s still unknown when they will be available.

Parts I used to build my Unifi Rack:

  • 7U Lande Netbox Soho Mini Rack
  • UDM Pro
  • Unifi USW-16-PoE Gen2 switch
  • 2U Vented Blank Panel
  • 1U Blank Panel
  • 2x 1/2U Blank Panel
  • 2x 24 ports Keystone Patch Panels
  • 24x Keystone Cat6 RJ45 Couplers
  • 24x Keystone Inserts black
  • Black Rack Screws and Cage nuts
  • 3x Unifi Patch Cable – Blue – 0.1m
  • 20x Unifi Patch Cable – White – 0.1m
  • 2x 120mm fan – Noctua NF-S12A PWM
  • Universal Adapter 3V- 12V
  • Aluminum Spray Paint – (I used spray paint from Auto-K)

Preparing the home network rack

For the cabinet, I have used a 7U Lande Netbox Soho which comes with a glass door. The cabinet is only 400mm deep, so you will need to use an angled c13 Power cord for the UDM Pro. I have left the UPS outside of the cabinet, and attach the powerstrip with double-sided adhesive tape to the back of the cabinet.

Having some airflow inside your cabinet is important for the lifetime of your network equipment. You can buy optional fans for the cabinet, but they make quite a lot of noise (45db). So instead I have used Noctua NF-S12A fans, which are the quietest fans that you can buy.

The UDM Pro also has fans that can make quite some noise when you install the hard disk for Unifi Protect. You can replace the fans in the UDM Pro with Noctua NF-A4x20.

To power the fans you can use a universal 3V-12V adapter on which you can regulate the voltage.

Running the fans on 9 volts gives a nice airflow to keep the UDM Pro on a steady 36 degrees. You can use solder seal wire connectors to easily connect the wires of the fan to the adapter. Make sure you check if the fan rotates in the correct direction before you solder them.

Painting the rack parts

To get that Unifi rack look and feel we will need to paint the patch and blind panels. The advantage of a keystone panel is that you don’t have to worry about the RJ45 connectors ;). Sand the components with a super fine 400 grit sanding paper before you paint them.

For the paint, I have used Auto-K Silver Aluminium Spray. I gave them two coats of paint with 15min between them. Some aluminum spray paints need to be baked in the oven to harden properly, so make sure you read the description. The Auto-K paint should be dry enough after 15 min, but I left them dry for the night to make sure the paint was hard enough and wouldn’t scratch.

Wiring the patch panels

I have only 14 active network connections, so the 16 ports PoE switch from Unifi is big enough for me. The downside of the 16 port switch is that all your ethernet connections are located on the right side of the device.

So I decided to use two patch panels. This allows me to use short, 10cm, Unifi patch cables for all the connections. What I also don’t want are cables that go over a device, or use brush panels to hide the cables.

Placing one patch panel between the switch and the UDM Pro allows me to make every connection I need from a patch port to a device, using only the short cables. This means that the connection from UDM Pro to the switch, goes from port 23 on the patch panel to port 22 (the yellow patch cable), so in the front, I can use the short cables and keep everything clean and nice looking. The green cable is the incoming WAN connection from the modem.

Normally I would use normal keystones (where you punch down the cable in), but I already have a (wall-mounted) patch panel and unfortunately are the ethernet cables too short to connect to the new patch panels.

All the network devices, like the Raspberry Pi, Smart hubs, etc, are connected to the patch panel from the back and not directly to the switch.

The keystone ports that I didn’t need are covered with black keystone inserts.

Final Result of the Unifi Rack

This rack had two small gaps at the top and bottom which I didn’t like. So I ordered two 1/2U blank panels to cover it. To do this you will need to drill a coupe of holes in the rack rails.

I have used the really thin 10cm long Unifi Patch cables. The blue cables are the WAN connection and the link between the UDM Pro and the Unifi switch.

Behind the vented blank panel are all the small network gear, like the modem, Pi and Smart hubs.

If you have any question about my Unifi Rack, then just drop a comment below.